EN
AR
DE
ES
FR
PT
RU
Kontaktéiert eis
Email: [Email geschützt]
Telefon: 0086 731 85240616
Dobäizemaachen: Sall 2702, Gebai # 2, Zhongyijiujun, No.29, South Junxing Road, Yuelu Distrikter, Changsha, Hunan, China.
CHINA ORIGINAL BEST PRÄIS 253MA HOT ROLLED STAINLESS HOLL TUBES FIR Heizofenausrüstung
| Place Hierkonft: | China |
| Marque: | Yasco |
| Model Number: | 253MA STAINLESS Stol Tube |
| Mindestbestand Quantitéit: | 100KGS |
| Präis: | 3 USD/KG |
| Packaging Detailer: | A BUNDELEN, AN HÄLZEN KRATEN |
| Liwwerzäit: | 3-15 DAGEN |
| Bezuelen Konditiounen: | VUN TT ODER LC |
| Kapazitéit liwweren: | 3000 TON pro Mount |
- PRODUIT DETAILS
Quick Detail
253MA ass en Nickel-spuerend Hëtztbeständeg austenitescht Edelstol entworf fir Uwendungen déi héich Kreepkraaft a gutt Korrosiounsbeständegkeet erfuerderen. Seng Operatioun Temperatur Gamme ass 850 ~ 1100 ℃.
description
253MA ass wäit an Sintering Ausrüstung, Héichuewen Ausrüstung, Stol Schmelze, Schmelze Schmelzhäre a kontinuéierlech Lous Equipement, Stol Walzaarbechten Millen (Heizofen), Hëtzt Behandlung Uewen an Accessoiren, Mineral Equipement an Zement Produktioun Equipement benotzt. 253MA Stol kann an Drocklager Occasiounen bis zu 900 ℃ an net-Drock-Héichtemperatur-Deeler mat Aarbechtstemperatur bis zu 1150 ℃ benotzt ginn.
OD: 0.04"-72" (1.0mm-1828.80mm)
WT: 0.004"-2" (0.1mm-50.8mm)
Längt: 3mtrs, 6mtrs, 12mtrs oder wéi pro Client Ufro
Dicht: 7.98 g / cm3
Tensile Stäerkt (Mpa): ≧600
Rendement Kraaft: (Mpa): ≧310
Verlängerung (%)≧35
Workshop
All Material gëtt duerch destruktiven an net-zerstéierende Testmethoden getest, déi a verschiddene Stadien am Produktiounsprozess duerchgefouert ginn.
Verpakung a Luede
Fir zefriddestellend Produkter, Verpakung a super Service fir eis Clienten ze bidden.
TECHNISCHEN SPEZIFIKATIOUN
Produit Numm: CHINA ORIGINAL BEST PRÄIS 253MA HOT ROLLED STAINLESS HËLLT Tubes FIR Heizung Uewen EQUIPMENT
| Type | Nahtlos Päif, Weld Päif | ||||||||||
| Gréisst | NPS 1/8"- 48" SCH: 5S,10/10S/,20,30,STD,40/40S,60,80/80S,XS,100,120,140,160,XXS OD: 0.04"-72" (1.0mm-1828.80mm) WT: 0.004"-2" (0.1mm-50.8mm) | ||||||||||
| Längt | 3mtrs, 6mtrs, 12mtrs oder wéi pro Client Ufro. | ||||||||||
| Pipe endet | Einfach Enn, Beveled Enn, Threaded Enn. | ||||||||||
| Uewerfläch / Finish | Gepickt, mechanesch poléiert, hell annealéiert, elektropoléiert | ||||||||||
| Test: | PMI Test Verlängerung an 50mm Longitudinal Wärmebehandlung 1050℃ fir 5 min. (WQ) IGC no ASTM A-262 Practice.E NACE STD: NACE MR0175-MR0103 ED - 2015 Flaring Testen ass ACC. BIS ASTM A1016 Flaachtest ass ACC. BIS ASTM A1016 DPT op Pipe Enden Eddy Aktuell Test Ultrasonic Test Radiographie Test (Röntgen) Hydrostatesch Test | ||||||||||
| Entgéintgehal | Bundles, Holzkëschten / Sperrholzkëschte. | ||||||||||
| Applikatioun | Ueleg & Gas Transport, LNG, petrochemesch, Atomkraaftwierk, Schëffsbau, Pulp a Pabeier, Kläranlag, Bau, Medizin, Liewensmëttel, Dekoratioun an anerer. | ||||||||||
| Liwwerzäit | 20-60 Deeg nom Empfang vun der Depot oder 1-10 Deeg wann Wueren op Lager. | ||||||||||
| Handelsofstand | EXW, FOB, CIF oder als Verhandlunge. | ||||||||||
| Bezuelen Begrëff | T / T (30% am Viraus, 70% géint Verpakung Biller) oder als Verhandlunge. | ||||||||||
| Qualitéitsufuerderung | Mill Test Zertifizéiert gëtt mat Sendung geliwwert, Drëtt Partei Inspektioun ass akzeptabel. | ||||||||||
| Main Market | Europa, Südostasien, Südafrika, Mëttleren Osten etc. | ||||||||||
Verfügbar Austenitesch Edelstahl Tube / Pipe
| ASTM Grad | UNS Grad | EN Grad | Auslännesch kommerziell Grad | Charakteristiken / Beispiller vun Applikatioun | |
| Austenitesch Edelstahl | 304 | S30400 | 1.4301 | - | Basis austenitescht Edelstol, fir Wärmetauscher a Päifen |
| 304H | S30409 | 1.4948 | - | Méi héich Kuelestoffgehalt, Kraaft an Hëtztbeständegkeet besser wéi 304 | |
| 304L | S30403 | 1.4307 | - | Ënneschten Kuelestoff Inhalt, besser Resistenz zu intergranular corrosion wéi 304, besser Weldability | |
| 304LN | S30453 | 1.4311 | - | Ënneschten Kuelestoff Inhalt mat Stickstoff dobäi, méi héich Kraaft.Fir fidderen Waasser Hëtzt Réier. | |
| Super 304 | S30432 | - | Super 304H(NSSMC) | Super 304, Kesselröhren | |
| 321 | S32100 | 1.4541 | - | Mat Inhalt vun Titan, besser corrosive Resistenz wéi 304 | |
| 321H | S32109 | 1.4940 | - | Méi héich Kuelestoffgehalt, Kraaft an Hëtztbeständegkeet besser wéi 321 | |
| 316 | S31600 | 1.4401 | - | Cl-korrosiv Resistenz | |
| 316L | S31603 | 1.4404 | - | Ënneschten Kuelestoff Inhalt, besser Resistenz zu intergranular corrosion wéi 316, besser Weldability | |
| 316LN | S31653 | 1.4406 | - | Ënneschten Kuelestoff Inhalt mat Stickstoff dobäi, méi héich Kraaft.Fir fidderen Waasser Hëtzt Réier. | |
| 316Ti | S31635 | 1.4571 | - | Mat Inhalt vun Titan, besser corrosive Resistenz wéi 316 | |
| 316LMoD/316LUG | S31603 | 1.4435 | - | Urea Grad 316 | |
| 317L | S31703 | 1.4438 | - | Besser Pitting Korrosiv Resistenz wéi 316 | |
| 317LMN | S31725 | 1.4439 | - | Mat Stickstoffgehalt, méi héich Kraaft a Strukturstabilitéit | |
| 310S | S31008 | 1.4845 | - | Héich Dauer a korrosiv Resistenz | |
| 304L | S30403 | 1.4307 | 3RE12 (Sandvik) | Héich Rengheet vun HNO3 Grad Edelstol, benotzt 65% HNO3 a méi niddereg | |
| 310L | S31002 | 1.4335 | 2RE10 (Sandvik) | Héich Rengheet vun HNO3 Grad Edelstol, benotzt 85% HNO3 a méi niddereg | |
| 310H | S31009 | 1.4821 | - | Méi héich Kuelestoffgehalt, besser Stäerkt an Hëtztbeständegkeet wéi 310 | |
| 314 | - | 1.4841 | - | Héich Siliziumgehalt, héich Temperatur Oxidatiounsbeständegkeet a Kraaftbrochkraaft | |
| 310 MolN | S31050 | 1.4466 | 2RE69 (Sandvik) | Urea Grad 310 | |
| 310 HCbN | S31042 | - | HR3C(NSSMC) | Héich Kraaft, héich Temperatur Resistenz, Kessel Réier | |
| 347H | S34709 | 1.4942 | - | Oxidatioun resistent an héich Temperatur Resistenz Kessel Réier | |
| 347HFG | S34710 | - | - | Héich Kärgréisst 347H, Kesselröhr | |
| 904L | N08904 | 1.4539 | 2RK65(Sandvik) | Héich Molybdän, et huet méi héich Korrosiounsbeständegkeet | |
| Super austenitescht Edelstol | S31254 | S31254 | 1.4547 | 254SMO(Sandvik) | 6% Mo Inhalt, héich Pitting a Spaltkorrosiounsbeständegkeet |
| N08367 | N08367 | - | AL6XN,AL6XN plus(ATI) | ||
| N08926 | N08926 | 1.4529 | - | ||
| S32652 | S32652 | 1.4652 | 654SMO(Outokumpu) | 7% Mo Inhalt, besser Pitting a Spaltkorrosiounsbeständegkeet | |
| S31277 | S31277 | - | - |
Chemesch Zesummesetzung vun Austenitic STAINLESS Steel Pipe / Tube
| Stol Grad | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | Nb | Ta | N | V | Cu | Ce | B | Al |
| TP304 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - | - | - | - | - | - |
| Spezifikatioune vun TP304L | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-13.0 | - | - | - | - | - | - | - | - | - | - |
| TP304H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | - | - | - | - | - | - |
| TP304N | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-11.0 | - | - | - | - | 0.1-0.16 | - | - | - | - | - |
| Spezifikatioune vun TP304LN | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 8.0-12.0 | - | - | - | - | 0.1-0.16 | - | - | - | - | - |
| Super 304 | 0.07-0.13 | 1.0 | 0.04 | 0.01 | 0.3 | 17.0-19.0 | 7.5-10.5 | - | - | 0.3-0.6 | - | 0.05-0.12 | - | 2.5-3.5 | - | 0.001-0.01 | 0.003-0.03 |
| TP309S | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 22.0-24.0 | 12.0-15.0 | 0.75 | - | - | - | - | - | - | - | - | - |
| TP309H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 22.0-24.0 | 12.0-15.0 | - | - | - | - | - | - | - | - | - | - |
| TP310S | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 19.0-22.0 | 0.75 | - | - | - | - | - | - | - | - | - |
| TP310H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 19.0-22.0 | - | - | - | - | - | - | - | - | - | - |
| Spezifikatioune vun TP310L | 0.015 | 2.0 | 0.02 | 0.015 | 0.15 | 24.0-26.0 | 19.0-22.0 | 0.1 | - | - | - | 0.1 | - | - | - | - | - |
| TP310MoLN | 0.025 | 2.0 | 0.02 | 0.015 | 0.4 | 24.0-26.0 | 20.5-23.5 | 1.6-2.6 | - | - | - | 0.09-0.15 | - | - | - | - | - |
| Spezifikatioune vun TP310HCbN | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 19.0-22.0 | 1.6-2.6 | - | - | 0.2-0.6 | 0.15-0.35 | - | - | - | - | - |
| 1.4841/TP314 | 0.2 | 2.0 | 0.045 | 0.015 | 1.5-2.5 | 24.0-26.0 | 19.0-22.0 | - | - | - | - | 0.11 | - | - | - | - | - |
| TP316 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| Spezifikatioune vun TP316L | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| TP316N | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | 0.1-0.16 | - | - | - | - | - |
| TP316H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| Spezifikatioune vun TP316TI | 0.08 | 2.0 | 0.045 | 0.03 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | 5X(C+N) | - | - | 0.1 | - | - | - | - | - |
| Spezifikatioune vun TP316LN | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | 0.1-0.16 | - | - | - | - | - |
| 316LMoD/316LUG | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 | - | - | - | - | - | - | - | - | - |
| TP317 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | - | - | - | - | - | - | - | - | - |
| Spezifikatioune vun TP317L | 0.035 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | - | - | - | - | - | - | - | - | - |
| Spezifikatioune vun TP317LM | 0.03 | 2.0 | 0.045 | 0.03 | 1.0 | 18.0-20.0 | 13.5-17.5 | 4.0-5.0 | - | - | - | 0.2 | - | 0.75 | - | - | - |
| Spezifikatioune vun TP317LMN | 0.03 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-20.0 | 13.5-17.5 | 4.0-5.0 | - | - | - | 0.1-0.2 | - | 0.75 | - | - | - |
| TP321 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-12.0 | - | - | - | - | 0.1 | - | - | - | - | - |
| TP321H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-12.0 | - | 4(C+N) -0.7 | - | - | - | - | - | - | - | - |
| TP347 | 0.08 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-13.0 | - | - | 10*C-0.01 | - | - | - | - | - | - | - |
| TP347H | 0.04-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-13.0 | - | - | 8*C-0.01 | - | - | - | - | - | - | - |
| 347HFG | 0.06-0.1 | 2.0 | 0.045 | 0.03 | 1.0 | 17.0-19.0 | 9.0-13.0 | - | - | 8*C-0.01 | - | - | - | - | - | - | - |
| S30815 | 0.05-0.1 | 0.8 | 0.04 | 0.03 | 1.4-2.0 | 20.0-22.0 | 10.0-12.0 | - | - | - | - | 0.14-0.2 | - | - | 0.03-0.08 | - | - |
| S31254 | 0.02 | 1.0 | 0.03 | 0.01 | 0.8 | 19.05-20.5 | 17.5-18.5 | 6.0-6.5 | - | - | - | 0.18-0.25 | - | 0.5-1.0 | - | - | - |
| 904L/N08904 | 0.02 | 2.0 | 0.04 | 0.03 | 1.0 | 19.0-23.0 | 23.0-28.0 | 4.0-5.0 | - | - | - | 0.1 | - | 1.0-2.0 | - | - | - |
| N08367 | 0.03 | 2.0 | 0.04 | 0.03 | 1.0 | 20.0-22.0 | 23.5-25.5 | 6.0-7.0 | - | - | - | 0.18-0.25 | - | 0.75 | - | - | - |
| N08926 | 0.02 | 2.0 | 0.03 | 0.01 | 0.5 | 19.0-21.0 | 24.0-26.0 | 6.0-7.0 | - | - | - | 0.15-0.25 | - | 0.5-1.0 | - | - | - |
| S32654 | - | - | - | - | - | - | - | - | - | - | |||||||
| S31277 | - | - | - | - | - | - | - | - | - | - |
Verfügbar Graden vun Duplex Edelstahl Tube / Pipe
| ASTM Grad | UNS Grad | EN Grad | Auslännesch kommerziell Grad | Charakteristiken / Beispiller vun Applikatioun | |
| Duplex Edelstol | S32304 | S32304 | 1.4362 | SAF2304(Sandvik) | Besser SCC, Pitting a Spalt ätzend, an Erosioun ätzend Resistenz an héich Kraaft, Ausbezuelkraaft ass ongeféier 2 Mol méi héich wéi 304 an 316. |
| S31803 | S31803 | 1.4462 | - | Besser SCC, Pitting a Spalt ätzend, an Erosioun ätzend Resistenz an héich Kraaft, nidderegen Cr an Ni Inhalt wéi S32205 | |
| S32205 | S32205 | 1.4462 | SAF2205(Sandvik) | Besser SCC, Pitting a Spalt korrosiv, an Erosioun korrosiv Resistenz. | |
| Super Duplex Edelstol | S32750 | S32750 | 1.4410 | SAF2507(Sandvik) | Besser SCC, Pitting a Spalt ätzend, an Erosioun ätzend Resistenz wéi gewéinlech Duplex Edelstol, méi héich Kraaft. |
| S31260 | S31260 | - | - | ||
| S32550 | S32550 | 1.4507 | UR52+ | ||
| S32760 | S32760 | 1.4501 | Null 100 | ||
| S32707 | S32707 | - | - | Hyper Duplex Edelstol, besser SCC, Pitting a Spalt korrosiv, an Erosioun ätzend Resistenz wéi aner Duplex Edelstol oder Super Duplex Edelstol, méi héich Kraaft. |
Chemesch Zesummesetzung vun Duplex STAINLESS Steel Pipe / Tube
| Stol Grad | C | Mn | P | S | Si | Cr | Ni | Mo | N | Cu | W | Co |
| S31200 | 0.03 | 2.0 | 0.045 | 0.03 | 1.0 | 24.0-26.0 | 5.5-6.5 | 1.2-2.0 | 0.14-0.20 | - | - | - |
| S31260 | 0.03 | 1.0 | 0.03 | 0.03 | 0.75 | 24.0-26.0 | 5.5-7.5 | 2.5-3.5 | 0.1-0.3 | 0.2-0.8 | 0.1-0.5 | - |
| S31500 | 0.03 | 1.2-2.0 | 0.03 | 0.03 | 1.4-2.0 | 18.0-19.0 | 4.3-5.2 | 2.5-3.0 | 0.05-0.1 | - | - | - |
| S31803 | 0.03 | 2.0 | 0.03 | 0.02 | 1.0 | 21.0-23.0 | 4.5-6.5 | 2.5-3.5 | 0.08-0.2 | - | - | - |
| S32001 | 0.03 | 4.0-6.0 | 0.04 | 0.03 | 1.0 | 19.05-21.5 | 1.0-3.0 | 0.6 | 0.05-0.17 | 1.0 | - | - |
| S32003 | 0.03 | 1.0 | 0.03 | 0.02 | 1.0 | 19.05-22.5 | 3.0-4.0 | 1.5-2.0 | 0.14-0.20 | - | - | - |
| S32101 | 0.04 | 4.0-6.0 | 0.04 | 0.03 | 1.0 | 21.0-22.0 | 1.35-1.7 | 0.1-0.8 | 0.20-0.25 | 0.10-0.8 | - | - |
| S32202 | 0.03 | 2.0 | 0.04 | 0.01 | 1.0 | 21.5-24.0 | 1.0-2.8 | 0.45 | 0.18-0.26 | - | - | - |
| S32205 | 0.03 | 2.0 | 0.03 | 0.02 | 1.0 | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 | - | - | - |
| S32304 | 0.03 | 2.5 | 0.04 | 0.04 | 1.0 | 21.5-24.5 | 3.0-5.5 | 0.05-0.60 | 0.05-0.20 | 0.05-0.60 | - | - |
| S32506 | 0.03 | 1.0 | 0.04 | 0.015 | 0.9 | 24.0-26.0 | 5.5-7.2 | 3.0-3.5 | 0.08-0.2 | - | 0.05-0.3 | - |
| S32520 | 0.03 | 1.5 | 0.035 | 0.02 | 0.8 | 23.0-25.0 | 5.5-8.0 | 3.0-5.0 | 0.20-0.35 | 0.50-3.0 | - | - |
| S32550 | 0.04 | 1.5 | 0.04 | 0.03 | 1.0 | 24.0-27.0 | 4.5-6.5 | 2.9-3.9 | 0.10-0.25 | 1.5-2.5 | - | 0.5-2.0 |
| S32707 | 0.03 | 1.5 | 0.035 | 0.01 | 0.5 | 26.0-29.0 | 5.5-9.5 | 4.0-5.0 | 0.3-0.5 | 1.0 | - | - |
| S32750 | 0.03 | 1.2-2.0 | 0.035 | 0.02 | 0.8 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | 0.5 | - | - |
| S32760 | 0.03 | 1.0 | 0.03 | 0.01 | 1.0 | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.20-0.30 | 0.5-1.0 | 0.05-1.0 | - |
| S32906 | 0.03 | 0.8-1.5 | 0.03 | 0.03 | 0.8 | 28.0-30.0 | 5.8-7.5 | 1.50-2.60 | 0.30-0.40 | 0.8 | - | - |
Verfügbar Grade vu ferriteschen a martensiteschen Edelstahl Tube / Pipe
| ASTM Grad | UNS Grad | EN Grad | Auslännesch kommerziell Grad | Charakteristiken / Beispiller vun Applikatioun | ||
| Ferritic STAINLESS Stol | 405 | S40500 | 1.4002 | - | Héich Temperatur Resistenz, Oxidatioun Resistenz, a Korrosioun Resistenz, Loft Wärmetauscher Rouer. | Benotzt bei enger Temperatur vu 700 ° C |
| - | - | 1.4724 | SIC9(Sanyo)/1C256(Sandvik) | Benotzt bei enger Temperatur vu 850 ° C | ||
| 430 | S43000 | 1.4016 | - | Benotzt bei enger Temperatur vu 800 ° C | ||
| - | - | 1.4742 | SIC10(Sanyo)/1C356(Sandvik) | Benotzt bei enger Temperatur vu 1000 ° C | ||
| - | - | 1.4762 | SIC12(Sanyo) | Benotzt bei enger Temperatur vu 1150 ° C | ||
| - | - | - | QS25T(Sanyo) | Benotzt bei enger Temperatur vu 1100 ° C | ||
| TP446-1/TP446-2 | S44600 | 1.4749 | 2C52/2C48(Sandvik) | Héich Temperatur Oxidatiounskorrosioun an der Loft, gutt Resistenz fir d'Reduktioun vu Schwefelgasen, Resistenz géint geschmollte Cu, Al an Zn, Loft Wärmetauscher Réier. | Benotzt bei Temperaturen 1000°C fir 446-1 an 1075°C fir 446-2 | |
| 439 | S43035 | 1.4510 | - | Gutt Resistenz géint SCC Korrosioun, Wärmetauscherröhre. | ||
| 444 | S44400 | 1.4521 | - | |||
| Super Ferritic Edelstol | S44660 | S44660 | - | Sea-Cure (Plymouth Tube) | Gutt Resistenz géint Chloridpitting a Spaltkorrosioun, Immun géint SCC, gutt Erosiounsbeständegkeet, héich thermesch Konduktivitéit a geréng thermesch Expansioun Desalinatioun, Muecht Mier-Waasser Kondensator Réier. | |
| S44735 | S44735 | - | AL29-4C(ATI) | |||
| S44736 | S44736 | - | AL29-4-2(ATI) | |||
| Martensitic Edelstol | 410S | S41008 | 1.4000 | - | Niddereg Korrosiounsbeständegkeet, geréng thermesch Expansioun, Wärmetauscher Réier. | |
| 410 | S41000 | 1.4006 | - | |||
| 420 | S42000 | 1.4021 | API/13Cr 180 | Gehärt duerch Hëtzt Behandlung, héich hardness. | ||
| 420J2 | S42000 | 1.4028 | - | |||
| 431 | S43100 | - | - | |||
| 17-4 Uhr | S17400 | 1.4542 | - | Nidderschlag härtend martensitesch Edelstol, héich Kraaft. | ||
| Super Martensitic Edelstol | 13 Kr110 | S41426 | 1.4313 | SM13CRS(NSSMC) Präis | Héich Kraaft, gutt corrosive Resistenz, API Ueleg a casing Päif oder Kupplung. | |
| - | - | 1.4418 | - | |||
| 17Cr110/125 | - | - | SM17CRS(NSSMC) Präis | |||
Chemesch Zesummesetzung vun Ferritic an Martensitic STAINLESS Stol Pipe / Tube
| Standard | Stol Grad | C | Mn | P | S | Si | Cr | Ni | Mo | N | Nb | Ti | Al | Cu |
| A/SA268 | TP405 | ≤0.08 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 11.5-14.5 | ≤0.50 | - | - | - | - | 0.1-0.3 | - |
| A/SA268 | TP410 | ≤0.15 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 11.5-13.5 | - | - | - | - | - | - | - |
| A/SA268 | TP410S | ≤0.08 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 11.5-14.5 | - | - | - | - | - | - | - |
| A/SA268 | TP430 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 16.00-18.00 | - | - | - | - | - | - | - |
| A/SA268 | Spezifikatioune vun TP430TI | ≤0.10 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 16.00-19.5 | ≤0.75 | - | - | - | 5C-0.75 | - | - |
| A/SA268 | TP446-1 | ≤0.20 | ≤1.50 | ≤0.040 | ≤0.030 | ≤1.00 | 23.00-27.00 | ≤0.75 | - | 0.25 | - | - | - | - |
| A/SA268 | TP446-2 | ≤0.12 | ≤1.50 | ≤0.040 | ≤0.030 | ≤1.00 | 23.00-27.00 | ≤0.50 | - | 0.25 | - | - | - | - |
| A/SA268 | TP409 | ≤0.08 | ≤1.00 | ≤0.045 | ≤0.030 | ≤1.00 | 10.50-11.70 | ≤0.50 | - | - | - | 6C-0.75 | - | - |
| A/SA268 | TP439 | ≤0.07 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 17.00-19.00 | ≤0.50 | - | 0.04 | - | 0.2+4(C+N)-1.1 | - | - |
| A/SA268 | TP444 | ≤0.025 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 17.50-19.50 | ≤1.00 | 1.75-2.5 | 0.035 | - | (Ti+Cb): 0.2+4(C+N)~0.8 | - | - |
| A/SA756/268 | 440C | 0.95-1.10 | ≤1.00 | ≤0.025 | ≤0.025 | ≤1.00 | 16.00-18.00 | - | 0.4-0.7 | - | - | - | - | - |
| A/SA693 | 17-4 Uhr | ≤0.07 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 15.50-17.50 | 3.0-5.0 | - | - | 0.15-0.45 | - | - | 3.0-5.0 |
| GOST 9941-81 | 15Cr25Ti | ≤0.15 | ≤0.80 | ≤0.035 | ≤0.025 | ≤1.00 | 24.00-27.00 | - | - | - | - | 5C-0.90 | - | - |
| API 5CT | L80/9Cr | ≤0.15 | 0.30-0.60 | ≤0.020 | ≤0.010 | ≤1.00 | 8.00-10.00 | - | 0.9-1.1 | - | - | - | - | - |
| API 5CT | L80/13Cr | 0.15-0.22 | 0.25-1.00 | ≤0.020 | ≤0.010 | ≤1.00 | 12.0-14.0 | - | - | - | - | - | - | - |
| EN10088-1 | 1.4724 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.015 | 0.70-1.40 | 12.0-14.0 | - | - | - | - | - | 0.7-1.2 | - |
| EN10088-1 | 1.4742 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.015 | 0.70-1.40 | 17.0-19.0 | - | - | - | - | - | 0.7-1.2 | - |
| EN10088-1 | 1.4762 | ≤0.12 | ≤1.00 | ≤0.040 | ≤0.015 | 0.70-1.40 | 23.0-26.0 | - | - | - | - | - | 1.2-1.7 | - |
| A/SA268 | S44660 | ≤0.030 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 25.0-28.0 | - | 3.0-4.0 | 0.04 | - | (Ti+Cb)=0.2~1.0 & ≥6(C+N)~0.8 | - | - |
| A/SA268 | S44735 | ≤0.030 | ≤1.00 | ≤0.040 | ≤0.030 | ≤1.00 | 28.0-30.0 | ≤1.00 | 3.6-4.2 | 0.045 | - | (Ti+Cb)=0.2~1.0 & ≥6(C+N)~0.8 | - | - |
Kontaktéiert eis
Zesummenhang Product
-
CHINA FABRIEK BEST QUALITÉIT SS904L STAINLESS SEAMLESS PIPE FIR Biergbau Industrie
-
CHINA FABRIEK Héichqualitéit SUS304 EFW STAINLESS STEEL PIPE FIR HYDROPOWER STATION
-
CHINA MANUFACTUR BEST QUALITY SS304 PICKLED A PASSIVAT STAINLESS TUBE FIR CONDENSER
-
CHINA Produzent GOOD PRÄIS TP444 1.4521 S44400 STAINLESS Stol TUBE FIR WATER Behandlung Planz
